Search Shortcut cmd + k | ctrl + k
Search cmd+k ctrl+k
Dark Mode
1.1 (stable)
COPY Statement

Examples

Read a CSV file into the lineitem table, using auto-detected CSV options:

COPY lineitem FROM 'lineitem.csv';

Read a CSV file into the lineitem table, using manually specified CSV options:

COPY lineitem FROM 'lineitem.csv' (DELIMITER '|');

Read a Parquet file into the lineitem table:

COPY lineitem FROM 'lineitem.pq' (FORMAT PARQUET);

Read a JSON file into the lineitem table, using auto-detected options:

COPY lineitem FROM 'lineitem.json' (FORMAT JSON, AUTO_DETECT true);

Read a CSV file into the lineitem table, using double quotes:

COPY lineitem FROM "lineitem.csv";

Read a CSV file into the lineitem table, omitting quotes:

COPY lineitem FROM lineitem.csv;

Write a table to a CSV file:

COPY lineitem TO 'lineitem.csv' (FORMAT CSV, DELIMITER '|', HEADER);

Write a table to a CSV file, using double quotes:

COPY lineitem TO "lineitem.csv";

Write a table to a CSV file, omitting quotes:

COPY lineitem TO lineitem.csv;

Write the result of a query to a Parquet file:

COPY (SELECT l_orderkey, l_partkey FROM lineitem) TO 'lineitem.parquet' (COMPRESSION ZSTD);

Copy the entire content of database db1 to database db2:

COPY FROM DATABASE db1 TO db2;

Copy only the schema (catalog elements) but not any data:

COPY FROM DATABASE db1 TO db2 (SCHEMA);

Overview

COPY moves data between DuckDB and external files. COPY ... FROM imports data into DuckDB from an external file. COPY ... TO writes data from DuckDB to an external file. The COPY command can be used for CSV, PARQUET and JSON files.

COPY ... FROM

COPY ... FROM imports data from an external file into an existing table. The data is appended to whatever data is in the table already. The amount of columns inside the file must match the amount of columns in the table table_name, and the contents of the columns must be convertible to the column types of the table. In case this is not possible, an error will be thrown.

If a list of columns is specified, COPY will only copy the data in the specified columns from the file. If there are any columns in the table that are not in the column list, COPY ... FROM will insert the default values for those columns

Copy the contents of a comma-separated file test.csv without a header into the table test:

COPY test FROM 'test.csv';

Copy the contents of a comma-separated file with a header into the category table:

COPY category FROM 'categories.csv' (HEADER);

Copy the contents of lineitem.tbl into the lineitem table, where the contents are delimited by a pipe character (|):

COPY lineitem FROM 'lineitem.tbl' (DELIMITER '|');

Copy the contents of lineitem.tbl into the lineitem table, where the delimiter, quote character, and presence of a header are automatically detected:

COPY lineitem FROM 'lineitem.tbl' (AUTO_DETECT true);

Read the contents of a comma-separated file names.csv into the name column of the category table. Any other columns of this table are filled with their default value:

COPY category(name) FROM 'names.csv';

Read the contents of a Parquet file lineitem.parquet into the lineitem table:

COPY lineitem FROM 'lineitem.parquet' (FORMAT PARQUET);

Read the contents of a newline-delimited JSON file lineitem.ndjson into the lineitem table:

COPY lineitem FROM 'lineitem.ndjson' (FORMAT JSON);

Read the contents of a JSON file lineitem.json into the lineitem table:

COPY lineitem FROM 'lineitem.json' (FORMAT JSON, ARRAY true);

Syntax

COPY ... TO

COPY ... TO exports data from DuckDB to an external CSV or Parquet file. It has mostly the same set of options as COPY ... FROM, however, in the case of COPY ... TO the options specify how the file should be written to disk. Any file created by COPY ... TO can be copied back into the database by using COPY ... FROM with a similar set of options.

The COPY ... TO function can be called specifying either a table name, or a query. When a table name is specified, the contents of the entire table will be written into the resulting file. When a query is specified, the query is executed and the result of the query is written to the resulting file.

Copy the contents of the lineitem table to a CSV file with a header:

COPY lineitem TO 'lineitem.csv';

Copy the contents of the lineitem table to the file lineitem.tbl, where the columns are delimited by a pipe character (|), including a header line:

COPY lineitem TO 'lineitem.tbl' (DELIMITER '|');

Use tab separators to create a TSV file without a header:

COPY lineitem TO 'lineitem.tsv' (DELIMITER '\t', HEADER false);

Copy the l_orderkey column of the lineitem table to the file orderkey.tbl:

COPY lineitem(l_orderkey) TO 'orderkey.tbl' (DELIMITER '|');

Copy the result of a query to the file query.csv, including a header with column names:

COPY (SELECT 42 AS a, 'hello' AS b) TO 'query.csv' (DELIMITER ',');

Copy the result of a query to the Parquet file query.parquet:

COPY (SELECT 42 AS a, 'hello' AS b) TO 'query.parquet' (FORMAT PARQUET);

Copy the result of a query to the newline-delimited JSON file query.ndjson:

COPY (SELECT 42 AS a, 'hello' AS b) TO 'query.ndjson' (FORMAT JSON);

Copy the result of a query to the JSON file query.json:

COPY (SELECT 42 AS a, 'hello' AS b) TO 'query.json' (FORMAT JSON, ARRAY true);

COPY ... TO Options

Zero or more copy options may be provided as a part of the copy operation. The WITH specifier is optional, but if any options are specified, the parentheses are required. Parameter values can be passed in with or without wrapping in single quotes.

Any option that is a Boolean can be enabled or disabled in multiple ways. You can write true, ON, or 1 to enable the option, and false, OFF, or 0 to disable it. The BOOLEAN value can also be omitted, e.g., by only passing (HEADER), in which case true is assumed.

The below options are applicable to all formats written with COPY.

Name Description Type Default
FORMAT Specifies the copy function to use. The default is selected from the file extension (e.g., .parquet results in a Parquet file being written/read). If the file extension is unknown CSV is selected. Vanilla DuckDB provides CSV, PARQUET and JSON but additional copy functions can be added by extensions. VARCHAR auto
USE_TMP_FILE Whether or not to write to a temporary file first if the original file exists (target.csv.tmp). This prevents overwriting an existing file with a broken file in case the writing is cancelled. BOOL auto
OVERWRITE_OR_IGNORE Whether or not to allow overwriting files if they already exist. Only has an effect when used with partition_by. BOOL false
OVERWRITE When set, all existing files inside targeted directories will be removed (not supported on remote filesystems). Only has an effect when used with partition_by. BOOL false
APPEND When set, in the event a filename pattern is generated that already exists, the path will be regenerated to ensure no existing files are overwritten. Only has an effect when used with partition_by. BOOL false
FILENAME_PATTERN Set a pattern to use for the filename, can optionally contain {uuid} to be filled in with a generated UUID or {id} which is replaced by an incrementing index. Only has an effect when used with partition_by. VARCHAR auto
FILE_EXTENSION Set the file extension that should be assigned to the generated file(s). VARCHAR auto
PER_THREAD_OUTPUT Generate one file per thread, rather than one file in total. This allows for faster parallel writing. BOOL false
FILE_SIZE_BYTES If this parameter is set, the COPY process creates a directory which will contain the exported files. If a file exceeds the set limit (specified as bytes such as 1000 or in human-readable format such as 1k), the process creates a new file in the directory. This parameter works in combination with PER_THREAD_OUTPUT. Note that the size is used as an approximation, and files can be occasionally slightly over the limit. VARCHAR or BIGINT (empty)
PARTITION_BY The columns to partition by using a Hive partitioning scheme, see the partitioned writes section. VARCHAR[] (empty)
RETURN_FILES Whether or not to include the created filepath(s) (as a Files VARCHAR[] column) in the query result. BOOL false
WRITE_PARTITION_COLUMNS Whether or not to write partition columns into files. Only has an effect when used with partition_by. BOOL false

Syntax

COPY FROM DATABASE ... TO

The COPY FROM DATABASE ... TO statement copies the entire content from one attached database to another attached database. This includes the schema, including constraints, indexes, sequences, macros, and the data itself.

ATTACH 'db1.db' AS db1;
CREATE TABLE db1.tbl AS SELECT 42 AS x, 3 AS y;
CREATE MACRO db1.two_x_plus_y(x, y) AS 2 * x + y;

ATTACH 'db2.db' AS db2;
COPY FROM DATABASE db1 TO db2;
SELECT db2.two_x_plus_y(x, y) AS z FROM db2.tbl;
z
87

To only copy the schema of db1 to db2 but omit copying the data, add SCHEMA to the statement:

COPY FROM DATABASE db1 TO db2 (SCHEMA);

Syntax

Format-Specific Options

CSV Options

The below options are applicable when writing CSV files.

Name Description Type Default
COMPRESSION The compression type for the file. By default this will be detected automatically from the file extension (e.g., file.csv.gz will use gzip, file.csv will use none). Options are none, gzip, zstd. VARCHAR auto
DATEFORMAT Specifies the date format to use when writing dates. See Date Format VARCHAR (empty)
DELIM or SEP The character that is written to separate columns within each row. VARCHAR ,
ESCAPE The character that should appear before a character that matches the quote value. VARCHAR "
FORCE_QUOTE The list of columns to always add quotes to, even if not required. VARCHAR[] []
HEADER Whether or not to write a header for the CSV file. BOOL true
NULLSTR The string that is written to represent a NULL value. VARCHAR (empty)
QUOTE The quoting character to be used when a data value is quoted. VARCHAR "
TIMESTAMPFORMAT Specifies the date format to use when writing timestamps. See Date Format VARCHAR (empty)

Parquet Options

The below options are applicable when writing Parquet files.

Name Description Type Default
COMPRESSION The compression format to use (uncompressed, snappy, gzip or zstd). VARCHAR snappy
COMPRESSION_LEVEL Compression level, set between 1 (lowest compression, fastest) and 22 (highest compression, slowest). Only supported for zstd compression. BIGINT 3
FIELD_IDS The field_id for each column. Pass auto to attempt to infer automatically. STRUCT (empty)
ROW_GROUP_SIZE_BYTES The target size of each row group. You can pass either a human-readable string, e.g., 2MB, or an integer, i.e., the number of bytes. This option is only used when you have issued SET preserve_insertion_order = false;, otherwise, it is ignored. BIGINT row_group_size * 1024
ROW_GROUP_SIZE The target size, i.e., number of rows, of each row group. BIGINT 122880
ROW_GROUPS_PER_FILE Create a new Parquet file if the current one has a specified number of row groups. If multiple threads are active, the number of row groups in a file may slightly exceed the specified number of row groups to limit the amount of locking – similarly to the behaviour of FILE_SIZE_BYTES. However, if per_thread_output is set, only one thread writes to each file, and it becomes accurate again. BIGINT (empty)

Some examples of FIELD_IDS are as follows.

Assign field_ids automatically:

COPY
    (SELECT 128 AS i)
    TO 'my.parquet'
    (FIELD_IDS 'auto');

Sets the field_id of column i to 42:

COPY
    (SELECT 128 AS i)
    TO 'my.parquet'
    (FIELD_IDS {i: 42});

Sets the field_id of column i to 42, and column j to 43:

COPY
    (SELECT 128 AS i, 256 AS j)
    TO 'my.parquet'
    (FIELD_IDS {i: 42, j: 43});

Sets the field_id of column my_struct to 43, and column i (nested inside my_struct) to 43:

COPY
    (SELECT {i: 128} AS my_struct)
    TO 'my.parquet'
    (FIELD_IDS {my_struct: {__duckdb_field_id: 42, i: 43}});

Sets the field_id of column my_list to 42, and column element (default name of list child) to 43:

COPY
    (SELECT [128, 256] AS my_list)
    TO 'my.parquet'
    (FIELD_IDS {my_list: {__duckdb_field_id: 42, element: 43}});

Sets the field_id of column my_map to 42, and columns key and value (default names of map children) to 43 and 44:

COPY
    (SELECT MAP {'key1' : 128, 'key2': 256} my_map)
    TO 'my.parquet'
    (FIELD_IDS {my_map: {__duckdb_field_id: 42, key: 43, value: 44}});

JSON Options

The below options are applicable when writing JSON files.

Name Description Type Default
ARRAY Whether to write a JSON array. If true, a JSON array of records is written, if false, newline-delimited JSON is written BOOL false
COMPRESSION The compression type for the file. By default this will be detected automatically from the file extension (e.g., file.json.gz will use gzip, file.json will use none). Options are none, gzip, zstd. VARCHAR auto
DATEFORMAT Specifies the date format to use when writing dates. See Date Format VARCHAR (empty)
TIMESTAMPFORMAT Specifies the date format to use when writing timestamps. See Date Format VARCHAR (empty)

Limitations

COPY does not support copying between tables. To copy between tables, use an INSERT statement:

INSERT INTO tbl2
    FROM tbl1;